Mounting Instructions

IN-GROUND ANCHOR INSTALLATION INSTRUCTIONS FOR SERENITY & UNITY UMBRELLAS

For installation you will require:

• Wheelbarrow and Spade
• Concrete Mix – Not included. Can be purchased from your closest building supply store eg. Home Depot/Bunings
• Spare wooden planks or other bracing materials
• Hex Key Set. This is included with umbrella

STEP 1 – Choose your site and ensure ground is level. Check for buried utilities.

STEP 2 – Dig your footing hole at least 500mmW x 500mmL x 600mmH / 1’7″ x 1’7″ x 1’11” It is recommended that you flare the footing hole slightly at the base for extra stability.  See Figure 8

STEP 3 – Fit Spigot onto the In-Ground Anchor – Use screws included with the umbrella – See Figure 7

STEP 4 – Prepare the concrete mix in your wheelbarrow

STEP 5 – Position the In-Ground Anchor in the hole and use the spirit level on the Spigot to ensure the anchor is level. See Figure 7.3 for where the level should come to. Ensure orientation is correct for how you wish to position your umbrella – See Figure 7

STEP 6 – Pour concrete into the hole to the bottom of the Spigot base, DO NOT cover any part of the Serenity Spigot.  Use the Spigot’s built-in spirit level to ensure it is level See Figure 7

STEP 7 – Use bracing and support to ensure the In-Ground Anchor and Spigot stay level.

STEP 8 – Allow at least 24 hours for the concrete to cure, your chosen product will have a recommended time on the packaging so double check this.